|
|
 |
 |
DC Gear-Motor Actuation
In response to customers’ demands for more valving options, Scivex® introduces a complete line of high pressure (2,500 psi [172 bar] and higher), medium pressure (approximately 1,000 psi [69 bar]), and low pressure (500 psi [34 bar] or lower) actuated valves specifically for OEMs.
| · |
Rotational accuracy of ± 2° for low/medium pressure actuators, ± 0.5° for high pressure actuators |
| · |
Standard actuation time for high pressure valves of less than 100msec for a 60° actuation |
| · |
Optical encoding ensures no tolerance procession between actuations |
| · |
Long life, durable performance – over 1 million actuations for NanoPeak™ Valves |
| · |
Lower cost compared to typical stepper-motor actuator assemblies |
| · |
More compact than similar stepper motor based actuators |
Key to the design of these actuators is the DC gear motor. This motor produces higher torque with lighter weight and a smaller “footprint” than our previous actuators, plus these additional characteristics:
| · |
Multiple configurations to suit most fluidic needs |
| · |
Safety tested and rated to conform to ETL, CSA and CE specifications |
| · |
Controller board identical for all valve/actuator combinations, allowing for hardware and programming commonality |
| · |
Control via standard RS-232 interfacing or TTL compatible contact closure |
| · |
Virtually unlimited daisy-chaining while maintaining independent communication with individual valves |
| · |
Easy-to-use commands for rapid integration into existing software platforms |
Gear motor actuator safety ratings:
| · |
ETL – through testing which conforms to the UL 61010A-1 standard |
| · |
CSA – through testing which conforms to CAN/CSA-C222 No. 1010.1-92 |
| · |
CE mark – through testing which verifies the valves conform to both IEC/EN 61010-1:2001 and EN 50081 |
Custom options, including stepper-motor-actuation, are also available.
[Back to top]
© 2004 Scivex, Inc., a Unit of IDEX Corporation.
Terms of Use | Privacy | Trademarks |
|
