 |
 |
| Divisions | |||||||||||
 |
 |
|
|||||||||
| Contact Information | |||||||||||
|
|
||||||||||
| Products & Materials | |||||||||||
|
|||||||||||
|
|
|
|||||||||
| Capabilities | |||||||||||
|
|
|
|||||||||
| Catalog Request | |||||||||||
|
|
|
|||||||||
| Email Newsletter | |||||||||||
|
|
||||||||||
| Job Opportunities |
 |
|
Medium Pressure Valves
The standard wetted surfaces for each valve are Teflon® and Vespel®, providing superior chemical resistance. Other combinations for the sealing surfaces exist for more aggressive chemical environments not compatible with Vespel, a polyimide material. One such option is a Teflon and PEEK™ combination. Each valve in this line allows tubing connections with standard 1/4-28 threaded fittings for flat-bottom ports, including the Upchurch Scientific® brand Flangeless and Super Flangeless™ fittings. These fittings will accommodate tubing with an outer diameter of up to 1/8” (3.2mm). The two primary Medium Pressure Valve configurations are: a 7-Port, 6-Way Selection Valve and a 6-Port, 2-Position Injection Valve. Each configuration is available in two standard versions which vary by the diameter of the internal fluid passageways – either .040” (1mm) or .062” (1.6mm). Other flow diameters are available for specific needs. These Medium Pressure Valves are available premounted on our DC gear-motor or stepper-motor actuator, or as manual versions. © 2004 Scivex, Inc., a Unit of IDEX Corporation. Terms of Use | Privacy | Trademarks |
